Innokin CoolFire Mini Z50 Starter Kit with Zlide Tank

CoolFire Z50 / SLIDE tank The Z50 follows on from the amazingly popular Coolfire Mini 40w, upgrading the maximum wattage possible to 50W, increasing the internal battery by over a third to 2100mah and doubling its tank capacity to 4ml! 

One of the most respected sub-brands of the better half of a decade has a new entry: the Innokin Coolfire Mini Z50 Starter Kit!

The Z50 follows on from the amazingly popular Coolfire Mini 40w, upgrading the maximum wattage possible to 50W, increasing the internal battery by over a third to 2100mah and doubling its tank capacity to 4ml! It's all crammed into a shell that's honestly not too much bigger than its original, keeping the portability alive and well.

Speaking of the shell, the Z50 is constructed with industry standard zinc alloy to take the day's bumping and grinding in its stride. A beautifully bright 0.69 inch OLED screen will keep you informed of all your critical information, and just the right level of clicky feedback on the buttons. If you ever make the transition to other MTL tanks or RDAs, be assured that the 24mm of room up top will house most modern atties with no overhang. The bottom mounted on-off switch is also much easier to keep in check than multiple clicks of the fire key!

Coupled with the Z50 is Innokin fan's fave MTL tank, the Zlide! This version of the Zlide is 4ml in capacity with a 24mm diameter, and carried over a lot of the love and care found in its daddy Zenith. The Zlide introduced Innokin's now famous locked sliding top fill, making refills secure and spill-free to boot! The 4ml Zlide here also boasts replaceable Pyrex glass too which you'll have a tough time breaking at all.

The full line of Zenith Z-Coils is compatible with the Zlide tank. Needless to say, these are THE most popular pre-made MTL coils in our little world down here for a reason. Their performance, lasting time and flavour are all off the charts! Included is the OG 0.8ohm coil, plus the new 1.2ohm MTL Z-Coil. 

Get this zippy little kit today!

Specs:

• Coolfire Z50 Mod:
  • Dimensions: 69.5 x 33 x 26mm
  • Battery: 2100mah inbuilt
  • Wattage Range: 6 - 50W
  • Voltage Range: 3 - 7.5V
  • Resistance Range: 0.2 - 3.5ohms
  • Construction: zinc alloy chassis
  • Display: 0.69" OLED
  • Protections: 15sec Cutoff, Low Voltage, Short Circuit
• Zlide Tank:
  • Diameter: 24mm 
  • Capacity: 4ml
  • Construction: Superior Stainless Steel, Pyrex 
  • Coils:
    • Z-Coil 0.8ohm: 12 - 15W
    • Z-Coil 1.2ohm MTL: 15 - 18W
    • Compatible with all Zenith Z-Coil Coils
  • Drip Tip: 510
• Higher battery and liquid capacity than Coolfire 40W
• Bottom mounted on/off switch
• Bright OLED screen for viewing in any conditions
• Zinc alloy frame for tough exterior
• Sliding top cap top fill with locking 510 drip tip
• Fully detachable structure and replaceable glass
• Incredibly Z-Coil line for top notch performance and flavour

What's in the box:

• 1 x Innokin Coolfire Mini Z50 Mod
• 1 x Innokin Zlide Tank w/ 1.2 ohm MTL Z Coil pre-installed
• 1 x Spare 0.8ohm Z Coil
• 1 x Spare Glass (4ml)
• 1 x Spare Drip Tip (non-locking)
• 1 x Micro USB Cable
• Set of O-Rings
• Quick Start Guide, Warning Booklet